stucco soft wash · Lanett, AL
stucco soft wash in Lanett
In Lanett, this comes up on mill-village houses and modest commercial streets. Older slabs are open and stained. Painted surfaces want chemistry, not force. Hairline cracks show up more after a wall is evenly clean. They were already there.
A tight door and clear gutters do more for a Lanett house in January than a cosmetic rinse.
Stucco stains green in shade the same way brick does. The chemistry for that is a controlled soft wash. The failure mode is pressure: it cuts the texture and, on barrier systems, it can drive water behind the cladding. We keep the pressure at a rinse. If a wall is already soft, bulged, or previously painted with a film that is letting go, we stop and say so.
EIFS and synthetic finishes are less forgiving than old cement stucco. If you know which one you have, tell us. If you do not, we will not guess our way into a warranty fight with your builder. A small test and a careful eye are cheaper than a dry-out.
We do not caulk, recoat, or “seal” stucco as part of washing it. Those are different trades. A clean wall makes the next decision easier. It is not the next decision.
The full explanation, without the town attached, is the stucco and eifs: low pressure, or you own a leak article. The town does not change the chemistry. It changes the houses, the shade, and the clay.
Nearby
Same subject, different question
Vinyl siding: soft wash, never a close nozzle →