concrete pressure washing driveway · Newnan, GA
concrete pressure washing driveway in Newnan
In Newnan, this comes up on large planned-community houses, downtown streets, and listing-ready new construction. Light concrete in newer neighborhoods shows every clay tire track and irrigation stain. Red clay is the local specialty. It smears if you only rinse it. It needs a pretreatment before the surface cleaner looks even.
Listings do not pause for winter, and HOA letters about a driveway do not either.
Flat concrete — drives, walks, pads — is one of the few surfaces where a pressure washer with a surface cleaner belongs. The spinning bar cleans evenly. A wand alone draws the stripes everyone recognizes from the curb. We use the surface cleaner on the field and detail the edges so you do not get a clean rectangle with a dirty frame.
Dark growth on concrete dies with hypochlorite. Red clay does not. Rust does not. Oil does not. Each of those is a pretreatment, then the mechanical clean. Skipping that step is why a driveway looks “washed” and still orange at the garage. We would rather name the stain than run the machine twice at your expense.
Sealing is a different day. The slab has to be clean and actually dry. We will not seal over oil, and we will not seal a slab that rained on this morning. Etching concrete down to exposed aggregate is not a free extra. If you want that look, it is a conversation, because you cannot undo it.
The full explanation, without the town attached, is the concrete can take pressure. it still needs the right pretreatment. article. The town does not change the chemistry. It changes the houses, the shade, and the clay.
Nearby
Same subject, different question
Vinyl siding: soft wash, never a close nozzle →